C-050 Pass-through mailbox for door and gate in RAL colours
-Material: sheet steel, powder coated
-Suitable for indoor and outdoor use
-Dimensions single box: 380 x 270 x 100 mm (HxWxD).
-Dimensions door throw-in: 85 x 275 mm (HxW)
-required door/gate thickness: between 12 - 34 mm
-DIN EN 13724 compliant, i.e. DIN A4 envelopes fit into the box without being bent.
Scope of delivery:
-Delivery includes 3 keys (per mailbox).
-Letter box is delivered completely assembled (post removal from the back)
Features and equipment of the mailbox
Are you looking for a pass-through mailbox for your gate or fence? Then our C-050 fence pass-through mailbox is something for you. This mailbox is specially made for mounting on gates or solid fences. In the C-050 gate pass-through mailbox, the box and the narrow front plate are connected with a screw thread. This allows intermediate material, such as a gate, from 12 to 34 mm thick to be flush-bonded between the letterbox components. If you exchange the supplied screws and replace them with longer ones, the fence pass-through letterbox can also be attached to stronger gates. The maximum recess in the gate or fence must be 65 x 248 mm.
The box and the front panel are made of high quality powder coated and galvanized steel. Thus, the C-050 gate pass-through mailbox in anthracite is weatherproof and durable. The C-050 is only available without nameplate and without bell.
Important note for the assembly of the C-050 letterbox:
Please tighten the front panel and the body only by hand with a screwdriver! Tightening with an electric screwdriver can cause too much tension, which can warp the front panel and break the screw thread.
Please note: the C-050 is not suitable for mounting on a double bar fence or other non-continuous fences or doors!
The letterbox standard DIN 13724 was observed during the production of the C-050 fence pass-through letterbox in anthracite or white. You will have no annoyance with mail hanging out or bent. The box and the insertion slot are sufficiently large and wide to catch C4 envelopes.
Color, material selection and enhancements
The C-050 gate pass-through Mailbox is also available in stainless steel in our store. On request, we also manufacture the C-050 in other RAL Colors.
Only our models A-050 and C-050 are suitable for mounting on a solid fence or gate. The design of front panel and mailbox which are clamped to a plate is unique in our store.
Alternatively, you can find compact fence pass-through mailboxes without intermediate gaps with a shapely front plate. These models can be found under the terms A-04 or the A-046. The fence through letterboxes can even be ordered with or without speech Screen.